Steam generator as an emerging heat source to provide equipment, can quickly be recognized by the market, by virtue of its unique technology, today on the core technology of gas steam generator to do a detailed introduction.
First of all, the most basic technology of gas steam generator is definitely the combustion, P low nitrogen burner with frequency conversion combustion and pressure tracking function, to realize the function of constant pressure output of steam. Low nitrogen combustion technology ensures nitrogen emission NOX﹤30mg/m3，Greatly improve the gas burnout rate (99.9%), the combustion process is more stable and safer, the temperature distribution in the combustion process is more uniform, there is a very high thermal efficiency, low combustion noise, low NOx emission under any power, low CO emission, the emission indexes do not change with the increase of the use of years of service, and so on, and support the environmental protection of the real-time online monitoring.
Composite superconducting heat pipe technology composite superconducting heat pipe technology refers to the pipeline for the double-layer structure, the outer wall of the heat pipe for the foreign heat pipe technology integrally molded finned tube, this tube for the integrally molded process, not only thickened the thickness of the fins also increased the heat transfer area at the same time so that the heat absorption is more uniform, due to the integrally molded special steel structure of the strength of the advantages of the fatigue of the metal has been greatly reduced, so that the life of the tube is more durable. At the same time, the inner wall tube for superconducting special heat pipe, this material is characterized by the heat transfer coefficient greatly exceeds the thermal conductivity of aluminum and copper, the outer wall tube of special steel heat absorption fast and combustion-resistant, the inner wall tube of heat transfer coefficient is large and conductive scale, the two together as a whole to fully solve the traditional 304, 316 series of tubes, metal or ND steel welded fins of the traditional process technology.
These are just some of the technologies of gas steam generators, as an early start steam generator manufacturers we have many more technologies.